RadioLINK Professional base. 230V with 10Yr+ Rechargeable Back-up. Works with 2100, 160RC and 140RC Series Alarms
The Ei168RC RadioLINK Alarm Base is an easi-fit mounting plate with a built in RF circuit designed to fit beneath 140RC Series Alarms. It provides wireless interconnection between other RadioLINK enabled Alarms and Devices. Up to 12 Alarms and Devices can be interconnected together so that when one Alarm is triggered all Alarms in the system sound. An interconnected system will enhance early detection and warning of fire.
The Ei168RC is mains powered with a back-up lithium cell. This ensures the Alarm base will still operate during a power outage and send out it’s Alarm signal. The Base includes a battery on/off switch which will automatically power the device upon Alarm head attachment.
Using the House-Code function you can install all of your Alarms into one system. This will safeguard the system from inteference from other RF systems. Likewise House-Coding prevents the RadioLINK system being a source of inteference for other RF systems.
The Ei168RC allows for easy expansion of an existing hard-wired interconnected system. Simply fit an Ei168RC to one of the exisng Alarms and fit the addional Alarms with Ei168RC bases and House-Code the RadioLINK Alarms into a system. If any Alarm, wired or wireless, is now triggered it will sound all the Alarms in the system. A mixed wired and wireless system is often referred to as a hybrid system.
If using an Alarm Remote Controller or switch in a hybrid system it must be installed on the wireless section of the system.
Features
- RF upgrade for 140RC Series Alarms
- Enables wireless RadioLINK interconnection for Alarms
- Mains powered with rechargable lithium cell back-up
- Interconnect up to 12 Alarms and Devices
- Makes it easier to add in new Alarms and Devices
- Eliminates tricky wiring runs
- Reduces installation time
- Reduces disruption and inconvenience
- Simple wiring and House Coding
- Multi path, multi repeater ‘Mesh’ system
- LED indicator
- Supports wireless remote control
- Same easi-fit Base
Specification
Supply Voltage: 230V AC, 50Hz
Battery backup: Recharagble lithium cells
RF Frequency: 868.499 Mhz RadioLINK protocol
RF Power: +5dBm
RF Protocol: Proprietary RadioLINK using multi-path, multi-repeater mesh architecture
RF Range: 100 metres in free air 30 metres in standard property
Temperature: Operating - 0°C to 40°C Storage - 0°C to 35°C (in a dry area)
Humidity Range: 15% to 95% Relative Humidity
Indicator LED: Blue - typically RF transmission, house code mode, low battery
Plastic material: UL94VO flame retardant
Dimensions: Product - 150mm x 37mm (20mm installed) Package - 153mm x 153mm x 40mm
Weight: 176g (Boxed 235g)
Warranty: 5 year (limited) warranty
Approvals: EN 300 220-3 (RF) & EN 301 489-3 (EMC)
Obstructions of any sort will result in a reduction in range from the free space specification. The range may vary depending on installation.
Specifications are subject to change
