Ionisation Smoke Alarm. 12V. Interconnectable. Built-in 1A Relay
The Ei100R Ionisation Smoke Alarm runs on a 12V DC power. The alarm gives a fire warning when adequate smoke enters the alarm.
The alarm has a pair of built-in Volt free relay contacts (i.e. can be used to switch into a burglar panel).
The alarm has other advanced features, such as built-in circuitry to aid suppression of voltage transients and RF interference to further reduce the chances of false alarms under such conditions.
The Ei100R can be interconnected with up to 12 other alarms so that when one alarms sounds all other connected alarms will also sound throughout the property.
The Ei100R is easily installed and comes supplied with all necessary screw fixings.
Features
- 12V DC powered
- Dual ionisation chamber sensor, Best for fast flaming fires (eg clothing)
- Interconnecatble with up to 12 other 100R Series alarms
- Volt-free Relay contacts supplied
- Built-in Test button
- Piezoelectric horn
- Low battery audible warning
- Kitemarked to BS EN 14604:2005
- 5 Year Guarantee
Specification
Sensor Type: Ionisation
RA Source: Americium-241
Supply Voltage: 10.2 to 14 V DC from panel
Relay Contacts: Volt free, Common/NO/NC
Horn: Piezoelectric
Sound Level: 85 dB(A) at 3 meters
Temperature: Operating - 0°C to 40°C / Storage - 0°C to 35°C (in a dry area)
Humidity Range: 15% to 95% Relative Humidity
Button Test: Simulates the effect of smoke and checks chamber, electronics and horn
Self Test: Smoke chamber is automatically tested every 40 seconds
Indicator LED: Red flash every 40 seconds - Power On and performed Selt Test / Red flash rapidly - Alarm
Plastic material: UL94HB flame retardant
Dimensions: Product - 140mm x 120mm x 45mm
Weight: 150g
Fixing: Screw fixings supplied
Warranty: 5 year (limited) warranty
Approvals: Kitemarked to 522831 / BS EN 14604:2005
Specifications are subject to change
