3 CHANNEL - ADDRESSABLE TRIPLE I/O MODULE
The interface is used to monitor the contacts of an external system which must be interfaced to the Fire Alarm System, for example a Flow Switch in a sprinkler system to indicate if the sprinklers have been activated or extinguishant level monitoring in Gas Extinguishing Systems, etc.
Module is provided with a loop short-circuit isolator and with up to 3 voltage free single pole change over relay outputs. The output relays are always powered directly from the detection loop. It is not required to use an external 24 V DC power supply. Relay operation is confirmed by an onboard red LED. A 8 way D.I.L. switch is provided to configure the module's address. This value can be set in the range 1 to 125.
The following programmable functions are available: Input Activation Mode, Delayed Input Alarm Activation, Output Delayed Activation.
Key Features
-
Fast Activation Response
-
Loop Powered Status LEDs for each I/O and O/P
-
Low Power Consumption
-
Module features an integral short-circuit loop isolator
