Fully functional networked Repeater Panel

The Syncro Focus/Focus+ LCD repeater is a display and control unit which duplicates the indications and primary controls of Syncro fire alarm control panels connected to the same network.

The repeater connects to the control panel via the network interface and requires that the main control panel have an S555 network card fitted. For full details of Syncro networking refer to Syncro Networking Manual.

The repeater is connected to the network and any number of repeaters can be connected up to the maximum number of nodes allowed by the network specification, which is 64 (including control panels).

In addition to displaying the status of the fire alarm system, the repeater can provide limited local control functions via local control outputs.

Specification

Size (24V DC model): 330mm x 250mm x 88mm

Size (230v model): 330mm x 250mm x 88mm (maximum battery size 2Ah)

Weight (24V DC model): 2.5Kg

Weight (230V AC model): 4.0Kg

Construction: 1.2mm mild steel and aluminium extrusions

Finish: Epoxy powder coated

Input voltage (24V model): 21V DC – 30V DC

Input voltage (230V AC model): 230V AC +10%/-15%

Current consumption: 80 milliamps at 24V DC.

Contact ratings: 30V DC 1 Amp max

Operating temperature: -5 to +40 degrees C

Display: 240 X 64 pixel graphic LCD

Cable entry: 3 x 20mm knockouts top and bottom

Indicators: 5mm high brightness LED.

Communications: Syncro System network protocol only

Cable length: 1200 metres to alternate nodes

Cable type: Belden 9271, Belden 9860 or FP200 Gold

Control panel compatibility: Software versions V3.4 and above